The messages appear when you operate Data Editor. Helpful information will be added to a message depending on your operation.

70002: The test case file is read-only or is being used by another application.
[Explanation] The same as above.
[User response] Check if another Data Editor is running and processing a data file with the same name as the test case file. Also, if it is network environment, check if another user is using a data file with the same.

70003: Cannot read the information file (.LNC file). Check the file.
[Explanation] The same as above.
[User response] The disk space or the memory may be insufficient.
- When the disk space is insufficient, select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.
- When the memory is insufficient, stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

70004: Cannot write the information file (.LNC file). Check the file.
[Explanation] The same as above.
[User response] Select another folder for "Folder to store test case files" in the Environment or increase the disk space, then retry.

70005: Cannot close the information file (.LNC file). Check the file.
[Explanation] The same as above.
[User response] Stop and restart Data Editor, then retry.

70006: Cannot create the information file (.LNC file). Check the file.
[Explanation] The same as above.
[User response] Select another folder for "Folder to store test case files "in the Environment or increase the disk space, then retry.

70007: Cannot open the information work file (.LNC work file). Check the workfiles folder.
[Explanation] The same as above.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70008: Cannot read the information work file (.LNC work file). Check the workfiles folder.
[Explanation] The same as above.
[User response] The disk space or the memory may be insufficient.
- When the disk space is insufficient, select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.
- When the memory is insufficient, stop the rest of application programs, if any, then retry. It it does not work, restart Windows(R)/Windows NT(R), then retry.

70009: Cannot write the information work file (.LNC work file). Check the workfiles folder.
[Explanation] The same as above.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70010: Cannot close the information work file (.LNC work file). Check the workfiles folder.
[Explanation] The same as above.
[User response] Stop and restart Data Editor, then retry.

70011: Failed to create the information work file (.LNC work file). Check the workfiles folder.
[Explanation] The same as above.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70012: Cannot delete the analysis option file. Delete the file.
[Explanation] The work file failed to be delete.
[User response] Exit the tool. Then, delete work files in the folder selected for "Folder to create Data Editor's work files" in the Environment.
* Files other than those with the extension 'LNC' may be deleted.

70013: Failed to delete the work file. Delete the file.
[Explanation] The work file failed to be delete.
[User response] Exit the tool. Then, delete work files in the folder selected for "Folder to create Data Editor's work files" in the Environment.
* Files other than those with the extension 'LNC' may be deleted.

70014: Cannot activate the analyzer. (Insufficient memory)
[Explanation] Due to insufficient memory, the COBOL parsing library could not start.
[User response] Stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

70015: Cannot activate the analyzer. (Insufficient disk space)
[Explanation] Due to insufficient disk space, the COBOL parsing library could not start.
[User response] The space of the drive where the folder specified for "Folder to create Data Editor's work files" in the Environment exists may be insufficient. Check the available space.

70016: Analysis error. Open the error file?
[Explanation] An error occurred while the format file was parsed. You are asked whether to see the error information file.
[User response] See the error information file and correct the format file.

70017: Cannot analyze the DEPENDING ON clause. Please modify the Library.
[Explanation] Data Editor cannot process COBOL records which include DEPENDINGON statement.
[User response] Remove DEPENDINGON statement from the COBOL record file.

70018: Error in analyzing the COBOL library. (Environment setup)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70019: Error in analyzing the COBOL library. (Level number)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70020: Error in analyzing the COBOL library. (data format)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70021: Error in analyzing the COBOL library. (OCCURS clause)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70022: Error in analyzing the COBOL library. (REDEFINES clause)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70023: Error in analyzing the COBOL library. (Digits)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70024: Error in analyzing the COBOL library. (Byte length)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70025: Error in analyzing the COBOL library. (Relative location)
[Explanation] An error occurred while the result of parsing of the format file was acquired.
[User response] Check if the format file is correctly described.

70026: Too many items.
[Explanation] More items than the maximum number that can be processed by Data Editor exist.
[User response] The maximum number of items that can be processed by Data Editor is 9998. Also, when OCCURS statement is included, the number in the state after expansion is counted.

70027: Insufficient memory. Close any unused applications.
[Explanation] The memory is insufficient.
[User response] Stop unnecessary application programs.

70028: Insufficient memory. Close any unused applications.
[Explanation] The memory is insufficient.
[User response] Stop unnecessary application programs.

70029: Cannot open the COBOL source work file. Check the workfiles folder.
[Explanation] An error occurred while a work file used for COBOL program file was opened.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70031: Cannot write the COBOL source work file. Check the workfiles folder.
[Explanation] An error occurred while a work file used for COBOL program file was loaded.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70032: Cannot close the COBOL source work file. Check the workfiles folder.
[Explanation] The same as above.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70033: Cannot create the COBOL source work file. Check the workfiles folder.
[Explanation] An error occurred while a work file used for COBOL program file was created.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70034: Cannot create the work file. Check the workfiles folder setup.
[Explanation] The same as above.
[User response] Select another folder for "Folder to create Data Editor's work files" in the Environment or increase the disk space, then retry.

70035: System error. (File pointer operation)
[Explanation] This is an error in operation of the test case file.
[User response] Stop and restart Data Editor, then retry.

70036: Cannot carry out the analyzer environment setup. Setup the environment correctly.
[Explanation] The COBOL parsing library has not been installed or its installation information is not correct.
[User response] Reinstall the COBOL parsing library.

70037: Analyzer environment not setup. Setup the environment correctly.
[Explanation] The COBOL parsing library has not been installed or its installation information is not correct.
[User response] Reinstall the COBOL parsing library.

70039: 66 and 88 level number items ignored during library analysis.
[Explanation] When items with the level numbers 66 and 88 are defined in the COBOL record file, they are ignored.
[User response] None

70040: Library record length exceeds the limit of 32760 bytes.
[Explanation] COBOL records longer than 32,760 bytes cannot be processed.
[User response] None

70041: The OCCURS phrase of an internal Boolean item is not supported. Please change the copy phrase.
[Explanation] COBOL records that include internal Boolean items (BITs) to which OCCURS statement is specified cannot be processed. This is also applied to COBOL records that include BITs belonging to a group item to which OCCURS statement is specified.
[User response] None

70042: The file which is not the test case file is specified for a test case file.
[Explanation] A file named 'Data file name + .LNC' exists in the folder specified for "Folder to store test case files" in the Environment, but the format of the file cannot be processed by Data Editor.
[User response] Delete the file with the name of 'Data file name + .LNC' from the folder specified for "Folder to store test case files" in the Environment, then retry.

70043: Error in parsing of the COBOL parsing library.
[Explanation] The same as above.
[User response] Check the value of "Format Parsing Method" in the Environment, then retry.

70044: The item of the length (32767 or more) that cannot be treated with Data Editor exists. Please change the copy phrase.
[Explanation] The same as above.
[User response] Follow the instructions in the message.

70051: Failed in taking the library of the COBOL97 product.
[Explanation] COBOL97 is not installed properly.
[User response] Install COBOL97.

70060: There is NO work file of test case.Please redo COBOL analysis
[Explanation] The test case file may failed to be parsed.
[User response] Parse the format file again.

70061: The path of work file of test case is WRONG.Please check work folder.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

70062: The attribute of the work file of test case is read only. Or the work file is used by other application. Please redo COBOL analysis.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

70063: The capacity of the disk is insufficient. Please retry this process after confirming the capacity of the disk.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

70064: There are some mistakes in the work file of the test case. Please redo COBOL analysis.
[Explanation] Information in the test case file is not correct.
[User response] Parse the format file again.

70101: There are some item names larger than 64 bytes. Data Converter can't treat the item name larger than 64 bytes. Ignore the part upper 64 byte and consider the part under 64 byte to be item name.
[Explanation] The same as above.
[User response] None

71001: Cannot obtain sufficient memory.
[Explanation] The memory space required for Data Editor to run could not be reserved.
[User response] Stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

71002: Cannot get global memory area.
[Explanation] The memory space required for Data Editor to run could not be reserved.
[User response] Stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

71003: Cannot open the file. Check the file name.
[Explanation] An error occurred while the test case file was loaded.
[User response] Check the test case file.

71004: Cannot read the file.
[Explanation] An error occurred while the test case file was loaded.
[User response] Check the test case file.

71005: Write information is not available for the file.
[Explanation] The loaded file does not have test case information.
[User response] Delete the test case file (the 'Data file name +.LNC' file in the folder specified for "Folder to store test case files" in the Environment).

71006: Error in expansion of OCCURS. (System error)
[Explanation] This COBOL record is not supported.
[User response] Contact a Alchemy Solutions service engineer (SE).

71007: Target of REDEFINES is not defined. Check that REDEFINES clause is correct.
[Explanation] This COBOL record is not supported.
[User response] Contact a Alchemy Solutions service engineer (SE).

71011: Cannot set the level.
[Explanation] This COBOL record is not supported.
[User response] Contact a Alchemy Solutions service engineer (SE).

71014: Redefinition at 01 level not supported. Update the Library.
[Explanation] The COBOL record file which includes a re-definition item corresponding to the level 01cannot be processed.
[User response] Delete the re-definition item corresponding to the level 01.

71015: Number of expanded OCCURS items exceeds the limit. Please update the Library.
[Explanation] The number of items after expansion of OCCURS statement has exceeded the upper limit.
[User response] None

71016: Internal Bool's item is not supported in expansion of OCCURS. Please update the Library.
[Explanation] The same as above.
[User response] Follow the instructions in the message.

71017: The redefine item exists in the lower level of the OCCURS phrase. The COPY phrase with different length of Item to be redefined and Redefine item cannot be treated by COBOL Analysis Library. Please analyze it by COBOL compiler.
[Explanation] The same as above.
[User response] Follow the instructions in the message.

72001: Cannot obtain sufficient memory.
[Explanation] The memory area required for Data Editor to run could not be reserved.
[User response] Stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

72002: Cannot get the global memory area.
[Explanation] The memory area required for Data Editor to run could not be reserved.
[User response] Stop the rest of application programs, if any, then retry. If it does not work, restart Windows(R)/Windows NT(R), then retry.

72003: Cannot open the file. Confirm the file name.
[Explanation] An error occurred while the target file was loaded.
[User response] Check the access assigned to the target file.

72004: Cannot read the file.
[Explanation] An error occurred while the target file was loaded.
[User response] Check the access assigned to the target file.

72005: Cannot write the file.
[Explanation] An error occurred while the target file was loaded.
[User response] Check the access assigned to the target file.

72006: Error in file operations.
[Explanation] An error occurred while the target file was loaded.
[User response] Check the access assigned to the target file.

72007: File read information not available.
[Explanation] An error occurred while the target file was loaded.
[User response] Check the access assigned to the target file.

72008: Not a data file. Specify a data file.
[Explanation] The specified file is not a COBOL85/97 data file.
[User response] Specify a COBOL85/97 data file.

72010: Error in initializing the COBOL file manager.
[Explanation] An error occurred during initialization of the COBOL runtime library.
[User response] Restart Windows(R)/Windows NT(R), then retry.

72011: Error in closing the COBOL file manager.
[Explanation] An error occurred during termination of the COBOL runtime library.
[User response] Restart Windows(R)/Windows NT(R), then retry.

72012: Error in the key count for the COBOL index file. Please provide the correct key count.
[Explanation] Inconsistency was detected during check of the number of record keys. This data file is not supported.
[User response] Contact a Alchemy Solutions service engineer (SE).

72013: Cannot open the data file.
[Explanation] The data file could not be opened.
[User response] Check if the settings in the data file information are correct.

72014: Cannot read the data file.
[Explanation] The data file could not be read.
[User response] Check if the settings in the data file information are correct.

72015: Cannot get the key information.
[Explanation] The record key information failed to be acquired.
[User response] Check if the specified data file is an index organization file.

72016: End of file reached. Specify correct selection record number.
[Explanation] The data file was read through but there were not any records matching with the specified retrieval conditions.
[User response] Check the retrieval conditions.

72017: Cannot create the data file.
[Explanation] The data file failed to be created.
[User response] Check the disk space.

72018: Cannot write the data file.
[Explanation] The data file failed to be written.
[User response] Check the disk space.

72019: Cannot close the data file.
[Explanation] The data file failed to close.
[User response] If it is an index file, you have to recover the data file by the file utility provided with COBOL85/97.

72020: Parameter error. Set the correct parameter.
[Explanation] An unexpected error occurred in an internal process.
[User response] Check the disk space.

72021: Error in skip mode setup. Set the correct mode.
[Explanation] An unexpected error occurred in an internal process.
[User response] Check the disk space.

72022: Cannot create the backup file.
[Explanation] The backup file failed to be created.
[User response] The space of the drive where the folder specified for "Folder to create backup files" in the Environment exists may be insufficient. Check the available space.

72023: Cannot delete the work file.
[Explanation] The work file failed to be deleted.
[User response] Exit the tool. Then, delete work files in the folder selected for "Folder to create Data Editor's work files" in the Environment.
* Files other than those with the extension 'LNC' may be deleted.

72025: Specified data file is already in use.
[Explanation] The specified data file may be being used by another application program.
[User response] Close the application program.

72026: The start record number for the save sequence range specification is incorrect. Please specify correctly.
[Explanation] The value of the starting record number is not correct.
[User response] Specify a value within the range between 1 and the number of existing records.

72027: Duplicate key in an index file.
[Explanation] The index organization file has duplicate key data.
[User response] None

72029: File access error.
[Explanation] The new data file could not be created.
[User response] Check the disk space and the access you have.

72030: The record, which becomes a hit to the condition, does not exist. Please change and extract the condition.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

72031: The code type is not set in the data file. Please set again and process the test case.
[Explanation] The specified data file does not include code information. Therefore, it is not the Unicode format of a line order organization file.
[User response] On Test Case Configuration screen, specify information on the data file again.

72032: COBOL files are specified as large files on Environment screen. The large file access function does not support access to index/relative organization files. Change the size of COBOL files to 'Standard' on Environment screen.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

72033: The file already exists. Update the existing file or delete it.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

73003: Memory shortage occurred by internal processing of Data Editor. Please end Data Editor. Please reactivate Data Editor after ending other applications and opening the memory.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75001: The lack of the capacity of the disk occurred when opening the data file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75002: The error of the FILE ACCESS PROHIBITION occurred when opening the data file. Please redo this process after checking the setting of that data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75003: The error of FILE UNDEFINITION occurred when opening the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75004: The error of INVALID PATH occurred when opening the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75005: The error of exceeding numbers of opened files occurred when opening the data file. Please redo this process after shutting some other applications.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75006: UNDEFINED(unknown) error occurred when opening the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75007: The error of FILE EXCLUSION ERROR occurred when opening the data file. Please redo this process after shutting the applications using this data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75008: An error occurred when opening the data file. Please redo this process after checking the data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75009: The lack of the capacity of the disk occurred when getting the length of the data file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75010: The error of the FILE ACCESS PROHIBITION occurred when getting the length of the data file. Please redo this process after checking the setting of that data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75011: The error of the FILE UNDEFINED occurred when getting the length of the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75012: The error of the INVALID PATH occurred when getting the length of the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75013: The error of exceeding numbers of opened files occurred when getting the length of the data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75014: UNDEFINED(unknown) error occured when getting the length of the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, then retry.

75015: The error of FILE EXCLUSION ERROR occurred when getting the length of the data file. Please redo this process after shutting the applications using this data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75017: The lack of the capacity of the disk occurred when opening the extraction file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75018: The error of the FILE ACCESS PROHIBITION occurred when opening the extraction file. Please redo this process after checking the setting of that data file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75019: The error of FILE UNDEFINITION occurred when opening the extraction file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75020: The error of INVALID PATH occurred when opening the extraction file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75021: The error of exceeding numbers of opened files occurred when opening the extraction file. Please redo this process after shutting some other applications.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75022: UNDEFINED(unknown) error occurred when opening the data file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75023: The error of FILE EXCLUSION ERROR occurred when opening the extraction file. Please redo this process after shutting the applications using this data file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75024: An error occurred when opening the extraction file. Please redo this process after checking the data file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75025: The lack of the capacity of the disk occurred when opening the 2nd work file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75026: The error of the FILE ACCESS PROHIBITION occurred when opening the 2nd work file. Please redo this process after checking the setting of that 2nd work file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75027: The error of FILE UNDEFINITION occurred when opening the 2nd work file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75028: The error of INVALID PATH occurred when opening the 2nd work file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75029: The error of exceeding numbers of opened files occurred when opening the 2nd work file. Please redo this process after shutting some other applications.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75030: UNDEFINED(unknown) error occurred when opening the 2nd work file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75031: The error of FILE EXCLUSION ERROR occurred when opening the 2nd work file. Please redo this process after shutting the applications using this 2nd work file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75032: An error occurred when opening the 2nd work file. Please redo this process after checking the 2nd work file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75033: Failed to read the data file.
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, an appropriate access is assigned and the disk space is sufficient, then retry.

75034: Failed to read the exclusion file
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75035: Failed to write to the data file
[Explanation] The same as above.
[User response] Ensure the path to the target file is correct, an appropriate access is assigned and the disk space is sufficient, then retry.

75036: Failed to write to the exclusion file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75037: Failed to write to the 2nd work filw.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create Data Editor's work files" in the Environment is correct, then retry.

75038: The lack of the capacity of the disk occurred when opening the data file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75039: The lack of the capacity of the disk occurred when opening the exclusion file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75040: The lack of the capacity of the disk occurred when opening the 2dn work-file. Please redo this process after checking the capacity of the disk.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75042: The data file is already opened. Please redo this process after closing that data file
[Explanation] The target data file may be being opened by another application.
[User response] Ensure none of the other application programs is using the target file.

75043: The data file is NOT opened.Please end this processing.
[Explanation] The internal process was aborted due to some reason.
[User response] Stop and restart Data Editor, then retry.

75044: The length of the name of the extraction file exceeded the limitation. Please reset the folder from which work file is made, using environmental setting.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75045: The length of the name of the backup file exceeded the limitation. Please reset the folder from which work file is made, using environmental setting.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75046: There are some mistakes in start location or end location of specification of relative position.Please redo this process after re-setting the relative position.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75047: DIDN'T set full information for file I/O.
[Explanation] The information required for file access is not set.
[User response] Ensure every information item on Test Case Selection dialog box is specified, then retry.

75048: There are some mistakes in setting of the parameter of making extraction file. Please redo this process after specified other data file.
[Explanation] The information required for file access is not set.
[User response] Ensure every information item on Test Case Selection dialog box is specified, then retry.

75050: The lack of the capacity of the disk occurred when opening the backup file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75051: The error of the FILE ACCESS PROHIBITION occurred when opening the backup file. Please redo this process after checking the setting of that backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct and an appropriate access is assigned, then retry.

75052: The error of FILE UNDEFINITION occurred when opening the backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct, then retry.

75053: The error of INVALID PATH occurred when opening the backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct, then retry.

75054: The error of exceeding numbers of opened files occurred when opening the backup file. Please redo this process after shutting some other applications.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75055: UNDEFINED(unknown) error occurred when opening the backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct, then retry.

75056: The error of FILE EXCLUSION ERROR occurred when opening the backup file. Please redo this process after shutting the applications using this backup file.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

75057: An error occurred when opening the backup file. Please redo this process after checking the backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct, then retry.

75058: Failed to write to backup file.
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct and an appropriate access is assigned, then retry.

75059: The lack of the capacity of the disk occurred when writing to the backup file. Please redo this process after checking the capacity of the disk
[Explanation] The same as above.
[User response] Ensure the value specified for "Folder to create backup files" in the Environment is correct and an appropriate access is assigned, then retry.

75060: The size of specified file exceeds the size which can operate by binary access. Please operate that file by large file access of COBOL.
[Explanation] The target file is larger than 2 GB.
[User response] For files larger than 2 GB, use the COBOL large access function to manipulate.

75061: The starting record number specifying the range of storage orders is larger than the number of records stored in the file. Specify an appropriate number.
[Explanation] The same as above.
[User response] Follow the instruction provided by the message.

76001: Failed to acquire information layout definition.
[Explanation] The same as above.
[User response] If the target layout definition file exists, confirm if the assigned access is appropriate.

76002: Data Editor can't operate the specified file because that form is not data file form
[Explanation] Because the input format of the layout file is not the data file format, the layout file cannot be processed by Data Editor.
[User response] Re-create a layout file whose input format is the data file format.

76003: Data Editor can't operate the specified file because no inputted data was set on that file.
[Explanation] The record length of the specified layout file is 0.
[User response] Re-create a layout file.

76004: Data Editor can't operate the specified file because the length of the record of that file exceeds the limitation(32,760 bytes).
[Explanation] The same as above.
[User response] Re-create a layout file.

76005: Failed to acquiring memory area.
[Explanation] The internal process failed to reserve the required disk space.
[User response] Exit unnecessary application programs, then retry.

76006: Failed to write to work file of test case because of the lack of the capacity of the disk.
[Explanation] The same as above.
[User response] Select another folder for "Folder to store test case files" in the Environment or increase the disk space, then retry.

76007: Data Editor can't operate the specified file because the number of item of that file exceeds the limitation(9999 items).
[Explanation] The same as above.
[User response] Re-create a layout file.